EAGTAC DX30LC2 SR CREE XP-L Hi Nichia 219B 219C CRI92 LED Rechargeable Flashlight 18650 CR123A Hunting light Built in Charger

55335

LED

• (Cool White) Spot CREE XP-L HI V3
  + Flood CREE XP-G2 S3

• (Neutral White) Spot CREE XP-L HI V2
  + Flood Nichia 219B CRI92 D220

• (Neutral White) Spot CREE XP-L HI V2
  + Flood Nichia 219C CRI92 D240

Max output

• Cool White

• • CREE XP-L HI V3 / XP-G2 S3 LED

  • LED lumen: 1160 / 500

  • ANSI FL-14lumen: 905 / NA

• Neutral White

• • CREE XP-L HI V2 / Nichia 219B CRI92

  • LED lumen: 1080 / 390

  • ANSI FL-14lumen: 842 / NA

  • CREE XP-L HI V2 / Nichia 219C CRI92

  • LED lumen: 1080 / 420

  • ANSI FL-14lumen: 842 / NA

Beam Profile

CREE XP-L HI V3 Cool White LED - SPOT

• Center lux: 20,800 lux

• Center spot angle: 5.2°

• Spill light angle: 62°

• Beam distance: 314 yards / 288 meters

CREE XP-G2 S3 Cool White LED - Flood

• Spill light angle: 100°

Lens - Spot/Flood

• Waterwhite glass lens w/ harden treatment

• Anti-reflective (AR) coating on both side (96% transparency)

LED circuit

• C3200L DIFF3 SC

• • Dual LED output design with three output groups

  • Ultra low dropout voltage for longer current regulated runtime

  • Highly integrated design w/ built-in side click switch

  • Low internal resistance design offers up to 99% efficiency

  • High switching frequency (1MHz) controller for more compact circuitry design

  • Non-dimming constant current regulation for all output levels without flicking

  • Smart battery level report system

  • Energy saving feature5

  • Zero standby current

Charging circuit

• L950 SC

• • 5V USB input (requires 1A or higher)

  • 950mA MAX charging current

  • Constant current / Constant voltage charging algorithm

  • Small current charging for low voltage battery (less than 3.0V)

  • Precise voltage detection design +/- 1%

  • No trickle charge

  • Smart charging level report system

Battery level report (discharging)

• A blue LED indicator under the main switch reports the estimated battery remaining capacity

• • Flash once: lower than 20%

  • Flash twice: 20%-50%

  • Flash 3 times: 50%-80%

  • Flash 4 times: higher than 80%

Charging level report (charging)

• A blue LED indicator under the main switch reports current charging level

• • Flash once: lower than 50%

  • Flash twice: 50%-75%

  • Flash 3 times: >75%

  • Constant on: 100% (done)

Output and Runtime

• Five brightness levels - Spot only

• • Led lumen:
    11605-980/590/221/77/9

  • ANSI FL-1 lumen:
    9055-790/475/178/62/7

  • Runtime:

  • 1.5/2.8/8.5/28/200+ hours (1x18650)6
    0.8/1.5/5/17/140 hours (2xCR123A)

• Five brightness levels - Flood only

• • Led lumen:
    500/260/111/50/9

  • Runtime:

  • 3.3/7.5/19/45/200+ hours (1x18650)6
    1.7/4/12/30/140 hours (2xCR123A)

• Five brightness levels - Spot + Flood

• • Led lumen:
    926/445/192/60/9

  • Runtime:

  • 1.8/4.5/12/35/200+ hours (1x18650)6
    1/2.5/6.5/22/140 hours (2xCR123A)

Operations

Basic operations:

• Turn on the light at MAX output by pressing the tailcap button until it clicks.

• Turn on the light at LOW output by holding the side switch button while pressing the tailcap button until it clicks.

• For momentary on function, slightly press the tailcap button

• To switch between different brightness levels, press the side button switch w/ flashlight on

添加链接

添加链接

Toggle SPOT and FLOOD output:

• Press and hold the side switch for more than one second to switch between spot only LED, flood only LED, and both LED.

添加链接

Battery charging:

• Remove the waterproof cover and insert the charging cable to charge the battery. User must turn on the flashlight switch at the tailcap to charge.
  (The flashlight will switch off the LED output during charge automatically until the charging cable is disconnected.)

• The indicator may start flashing when user plug in the charging cable (without turning on the tailacp switch). Switch on the tailcap switch to start charging and the charging indicator will reflect the current charging level.

Changing

Controls

添加链接

Other features

• LED direct soldering on copper for maximum heatsink ability (Spot LED only)

• User replaceable glass lens

• Battery reverse polarity protection

• Ultra low internal resistance phosphor bronze springs (silver coated)

• Spring loaded positive and negative terminal

• Bi-directional pocket clip design

• Built-in li-ion charger

Warranty

• Ten years performance guaranteed warranty

Dimensions

Head Dia.0.9inches (23mm)Body Dia.0.85inches (22mm)Length:5.2inches (132mm)Weight2.4ounces (67 grams)
w/o battery4ounces (113 grams)
w/ battery

添加链接

Battery Type

• 1x18650 or 2xCR123A2

• The built-in li-ion rechargeable function only works with a single 18650 battery

• Compatible battery (diameter/length)

• • 123A: (16-16.8mm/34-34.5mm)

  • 18650: (18-18.8mm/67-68.5mm)

• Readprecaution with li-ion batteries.

Operating voltage

• 2.7V - 6V

• All batteries are connected in series. Do not exceed 6V. Do not use two rechargeable 3.0/3.7V RCR123A.

What's included

• DX30LC2-SR flashlight

• Spare o-rings

• User Manual

• Mil-Spec Para-cord Lanyard w/ quick attachment clip

• Comes with stainless steel bezel

• USB charging cable (3.3feet/1meter)
  w/ AWG24 copper wire

• EAGTAC 18650 Li-ion battery included

Two models

• Base

• • Smooth stainless steel bezel

  • EAGTAC li-ion 18650 2600mAh battery (authentic Sanyo Japan cell)

  • Removeable silver pocket clip made of spring steel w/ harden treatment

• Kit

• • Crenulated stainless steel bezel

  • EAGTAC li-ion 18650 3500mAh battery (authentic Sanyo Japan cell)

  • UL certified USB 5V 1A wall charger (100V-240V)

  • Heavy duty nylon holster

  • Removeable dark gray pocket clip made of spring steel w/ harden treatment

Carrying method

• Para-cord lanyard with quick attachment clip

• Heavy duty nylon holster

Waterproof

• IPX-8 standard

Replaceable items

• Lens

Reflector

• Smooth aluminum reflector

Material

• HAIII hard anodization aerospace aluminum