Electric Bike/Bicycle E-bike E-scooter Brushless Controller 36V 48V 350W 15A with Twist Thumb Throttle

Product details

note：The throttle interface and the controller throttle interface are not made by the same factory. The line sequence of this wiring port is not a perfect match. The buyer needs to adjust the line sequence by himself, so that the same color line sequence can be connected to each other.

36V-48V 350W controller can work with hall sensor/hall sensorless

Rated Voltage: 36V/48V

Low Voltage : 30V/39V±0.5V

Rated Power: 350W

Limit Current: 15A

Phase Angle: Universal for 60° and 120°

Main functions: three-speed, cruise, 1:1 assist

1.self-learning

2.low brake(electric brake）

3.throttle

4.cruise

5.hall

6.3-speed

7.PAS（pedal assist）

8.anti-theft power supply

9.anti-theft signal

10.headlights

11.electric lock

12.motor

13.battery（red：battery+，black：battery-）

14.pointer meter

how to connect ？

1.connect the motor line (color to color）

2. connect the battery line(red wires :battery + , black:battery-)

3. connect the controller throttle line（color to color），connect electric lock

（if your throttle not have electric lock，controller electric lock can be shorted）

4. connect the hall line(if motor without hall line, don't need connect)

5.docking the two self-learning lines, the wheel will forward or reverse.

(1.if wheel forward ,Separate the self-learning line.

2.if wheel reverse, Separate the self-learning line. Docking the self-learning line again，if wheel forward ,Separate the self-learning line.)

6.other functions can be connected as needed.

1.self-learning

2.cruise

3.hall instrument

4.3-speed

5.throttle

6.PAS（pedal assist）

7.low brake

8.hall

9.headlights

10.anti-theft power supply

11.anti-theft signal

12.electric lock

13.motor

14.battery（red：battery+，black：battery-）