Huepar Laser Receiver LR-5RG for Laser Level Green & Red Beam Detector for Pulsing Line Lasers Two-Sided Back-lit LCD Displays

Huepar Laser Receiver LR-5RG for Laser Level Green & Red Beam Detector for Pulsing Line Lasers Two-Sided Back-lit LCD Displays

The Questions You May Have

Q: What is features for this Huepar LR-5RG Laser receiver detector?

A: This laser receiver do supply dual-sided displays which is on the front and back of the receiver, provides easier visual reading without frequent repositioning.

Q: How to use the LR-5RG with both red /green beam laser levels?

A: Turn on the Pulse Mode of the laser level, then Huepar LR-5RG laser receiver allows detection of Red and Green pulse laser beams in difficult light conditions, distances up to 197ft (60m).

Q: For what kinds of laser level could use with the Huepar LR-5RG?

A: It can be used with Huepar Laser Levels with pulse mode. And if your laser level is not Huepar brand, you could check if your laser level meet for this data: PWM: 5:5, Receiving Frequency: 10K Hz. Or confirm with us if it could uses with your laser level.

Q: How to recognize the buzzer reminder?

A: A beeping tone signals that the laser beam has been detected; A slower beeping tone signal needs to move up the laser detector; A fast beeping tone signal needs to move down the laser detector

Q. Do the laser level have a warranty?

A: Yes, It has one year warranty.

Huepar LR-5RG Laser Receiver Detector Specification:

Laser Class: Class 2 (IEC/EN60825-1/2014) <1mW power output.

Pulse duration: 50μs ; PWM: 5:5Frequency: 10KHz (Matched PWM and frequency, Line lasers can work with LR-5RG Laser Receiver)

Display: Dual LCD Display

Leveling Accuracy (High): ≤2mm(1/13in)

Leveling Accuracy (Low): ≤3mm(1/9in)

Working Distance: 130ft~200ft (typical) depend on light source

Operating Time: 20 hours; Auto Power Off (with No Signal Detected): 10min

Power Source: 2*AA Batteries (Alkaline) Do not included from China

Dimension (LxWxH): 140mm×68mm×26mm; Weight: 140g

Please Note: NOT compatible with Rotary Laser Level.This laser receiver can NOT be used with the laser level without Pulse Mode ( Like 9011G/R, B011G/R, A011G/R, 9211G, 9300G, 8211G and so on).

This item is compatible with pulse induction laser levels only!!!!!!!

If you are not sure whether it suits for your laser tool, please confirm with us before you place an order!!!!!!!

Package Contents:

1x Huepar LR-5RG Digital Laser Receiver Detector

1x Heavy-duty clamp

Using Tips:

● Put the laser level in Pulse (Outdoor) Mode.

● Made sure the laser level and the Receiver windows were clean.

● Recheck the batteries in both devices (Laser level & Huepar Laser Receiver).

● Made sure your laser level could used in accompanied with Huepar Receiver.

● Recommended for using with Huepar 902CG, 901CG, 8211G, BOX-1G/R, GF360G/R, 622CG/R, 621CG/R, 603CG/R, 602CG/R Laser Level.

LCD Icons:

Move the Detector as the Direction Shown:

●Datum Lower than Laser Beam – Move Up

● Datum Higher than Laser Beam – Move Down

● When Datum in Line with Laser Beam – The Direction becomes a Line.

Buzzer Remind

A beeping tone signals that the laser beam has been detected:

● A slower beeping tone signals – Move Up

● A fast beeping tone signals – Move Down

Can toggle through the volume, or turn on Mute.

Humanized Function

It boasts a dual-sided LCD display, backlight and battery status. Can toggle through the volume and accuracy. While the accuracy mode allows you to switch between HIGH and LOW.

Built-in Bubble and Holder

LR-5RG Laser Detector comes complete with a compatible rod mounting bracket.A built-in bubble level provides an extra measure of leveling accuracy.

High Quality

Robust and built tough to last, the detector is durably constructed with a hard plastic housing and rubber casing for long-term use, as well as protection against wet weather conditions when working outdoors.