Motorcycle Accessories Gear Indicator For Honda Goldwing GL1800 Gold Wing GL 1800 2005 - 2017 2016 Waterproof Gear Display Meter

For Honda Goldwing GL 1800 2005 - 2017

Condition:100% Brand New

Color of Light Source:Red/Blue/green

Item Name:Speed Gear Display Indicator

Size:4cm*4cm*4cm/1.57inch*1.57inch*1.57inch

▶Feature:

Shows current gear number

Indicates current gear from 1 to max of 6. as well as a neutral indicator.

Detects the current gear faster than other gear indicators that use speedometer/tachometer signal.

Display can be mounted anywhere

▶Installation:

Find the RED,4-pole male diagnostic connector(DLC), usually near the ECU box,It may have a removable cap and may be partially covered by black tape.

▶Gear indicator programming steps:

1. Use the center stand to lift the rear wheel of the motorcycle (or find a wide and straight road). After correctly connecting the gear indicator to the motorcycle's plug, turn on the key switch and energize the gear indicator. The countdown 6-1 will be displayed, and then L will be displayed.

2. Start the motorcycle engine, L flashes quickly, you need to shift to 1st gear, when the gear indicator shows 1, you need to press the right hand accelerator to accelerate. When the gear indicator shows "n" or "u", you must release the right hand throttle.

3. When the gear indicator displays the number "2", you must immediately shift into second gear and then continue to accelerate by pressing the accelerator.

4. Follow this operation to finish learning the 5th gear.

5. When the gear indicator light displays "6", you do not need to engage any gear. You only need to continue to accelerate with the right hand throttle until "6" stops flashing rapidly and the number 6 remains constant. Gear indicator learning completed. You can try switching to other gear numbers to see if the display is correct.

▶Gear indicator reset steps:

When the gear indicator digital display is wrong or the programming steps are wrong, you need to reset the gear indicator.

Turn on the key switch, and the gear indicator will show 1, 2, 3, 4, 5, 6. When the gear indicator shows 3, 4, 5, you need to turn off the key switch immediately, and then turn on the key switch immediately. In this way, continuously turn the key switch on and off (that is, keep the gear indicator energized and de-energized) until the gear indicator shows the countdown 6, 5, 4, 3, 2, 1, L. Reset successful.