Spray Gun Oil/Water Separator, 1/4" Filter Pressure Regulator, EU Adapter With Air Pressure Regulator, Air Compressor Regulator

【SPECIFICATION】

Directly for small pneumatic tools air intake filtration moisture in the air.
Pressure range: pressure 1-9kg / cm².The maximum pressure less than 9.9kg / cm²
Thread Size: male side connection British units 1/4 "
Temperature range: 41-140 ℉ (5-60 ℃)
Flow rate: 141 SCFM (4000 L/min) @ 90 PSI
The female side can be directly connected to the gun, screw-type inlet connector British units 1/4 "Are threaded connections.

Performance: In the case of spraying demanding, high-end gun necessary aids. Fast interfaces directly to the spray gun, ensure that the paint after paint atomizing not mixed with any moisture inside. Making higher quality paint spraying.

【FEATURE】

1/4 "NPT semi-automatic drain air pressure filter/regulator device, which allows you to obtain accurate pressure under full control of the pressure gauge.

The filter can filter fine particles and dust, keep the air dry and clean, have a longer service life and can be reused.

5 micron brass ball valve is easy to install and disassemble, so that you can obtain the adjusted pressure value at any time.
Easy to operate。

Perfect replacement for a water separator/pressure regulator that got broke.
Very compact design. Perfect for HVLP & airbrush use.

Note:
*Spray gun is not included.
●Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
●Please allow 1-2cm measuring deviation due to manual measurement.