ThinkRider 28g Ultralight Bike Inner Tube 700 x 18 25 28 Road Bicycle TPU Tire 45/65/85mm Length French Valve Super Light Tube

When not fitted to the outer tyre it must not be
heavily inflated.
Otherwise irreversible damage will occur!
Before fitting, please slightly inflate the tyre to check for leaks!
When mounting, inflate the tyre by 0.5PSl first.
Make sure the inner tube is pressed against the
inner wall of the tyre and then press to adjust the tube
Inflating more than 6psi empty will
result in an unrepairable swell.
Remember to never exceed 6psi when pumping empty.

Ultralight Inner Tube

45/65/85mm

PRODUCT INFORMATION

Brand：Thinkrider
Name：Ultralight inner tube
Material：TPU
Weight：28g
Size：700*18-32c
Nozzle：SV45/65/85mm1.77/2.55/3.34in)
Suitable for：For rim brake and disc brake wheelsets

LIGHTWEIGHT 70% LIGHTER THAN NORMAL INNER TUBES

More cost-effective weight reductian solution

COMPACT AND PORTABLE SUITABLE FOR CARRYING AROUND

Almast 70% smaller than traditinnal rubher tubes,making it easier to carry around.

SUITABLE FOR RIM FRAME HEIGHT

45mm, 65mm and 85mm valve lengths.
Compatible with most rim heights

ANTI-PUNCTURE REDUCES THE CHANCE OF PUNCTURES

Newly upgraded second-generation TPU material has bettertoughness and anti-puncture performance, compared with the traditional rubber inner tube is stronger, riding safer.

STRONGER AIRTIGHTNESS ALUMINIUM ALLOY NOZZLE

Every finished tyre passes the inflation parking test before leavingthe factory to ensure the air retention performance of each tyre.

MORE UNIFORMINNER TYRE WALL

Strict control of the manufacturing process ensures that each innertube is of the same quality and has a uniform wall.

AGEING RESISTANCE LONGER SERVICE LIFE

Strict control of the manufacturing process ensures that each inner tube is of the same quality

INNER TUBE DISPLAY

Installation Instructions

The inner tube is made of TPU and strictly forbidden to pull on the to test its elasticity!
It is forbidden to inflate the inner tube when it is empty! (not mounted in the outer tube)
Please follow the installation instructions below!
(Mainly the installation direction)
-Inner Tube Assembly Steps
1. Starting from the valve part, put the tube into the tire orderly in one direction as illustrated.
2. Then, do it orderly in the other direction as illustrated until the whole tube fits in.
3. Starting from the opposite side of the valve (as illustrated), fit in the tire orderly in bothdirections simultaneously.
4. lf no press and pull to adjust the valve, it may result in deformationor breakage while pumping, due to the valve being jammed inside.
5. At 0.5 psi, massage and adjust the tube to fit into the rim.
Adjust the tube
-lts important to massage the tube at 0.5 psi.
-This step will prevent the tube from not fully expanded.

As tyre working rings are often unpredictable, it is important that the tyre is fully inflated. whether the tyre is fully inflated, whether it has just been ridden on a crummy road, whether whether something else has happened or not.
Therefore, the inner tubes sold in our shop Please note that the quality of the inner tube is intact when you sign for it.
Once installed and used on the ground, they are
not returnable.
Please note that By placing an order you are taking note of this paragraph and agree to the shop's Outer tyre warranty.
No warranty on mounting to the ground.
If you do not agree, please do not place an order.